Skip to main content

Mechanical Engineering REVIEW CENTERS in the Philippines

By Admin
The following are the addresses and contact numbers of some review centers in Metro manila and Cebu City offering review classes in Mechanical Engineering.



Alcorcon Engineering Review Center-Manila

4th Floor, Anacleta Building, 891 Galicia Street, Corner Espana Blvd., Sampaloc, Manila

Tel No. (02) 742-5600


Alcorcon Engineering Review Center - Cebu

4th Floor, Villa Campa-Capuras Building, Sanciangko Street, Cebu City

Tel No. (032) 254-3384




Linx Engineering Review Center

2nd Floor CMFFI Old Bldg., 815 R. Papa St., Sampaloc, Manila

tel No. 7368670


CDTC Review Center

Dona Amparo Bldg, G. Tolentino St, cor Espana Blvd., Sampaloc, Manila


MERIT Review Center

2nd Floor, San Jose Bldg. Cor. Espana & P. Campa Sts., Sampaloc, Metro Manila


Prime Review Center

Rm 401-404 GMT Bldg., cor Junquera and P. Del Rosario Sts.,Cebu City

tel No.(032) 416-8175




maps courtesy of www.openstreetmap.org
Reblog this post [with Zemanta]
Labels:

Comments

  1. Mr. Jitendra AngaraOctober 27, 2009 at 2:41 PM

    I have seen a site which is also having good information about some more mechanical engineering products like inconel pipes, tubes & many more.. if you want can check http://www.inconelalloys.com/...

    ReplyDelete
  2. patNovember 12, 2009 at 6:50 PM

    luma na ung map ng review center for alcorcon.... sa recto na sila near yellow cab... papasok sa may datamex...

    ReplyDelete
  3. AdminNovember 13, 2009 at 4:11 PM

    Thanks for the info pat...Can I get the new official address so I can update the map? Thanks.

    ReplyDelete
  4. AnonymousDecember 19, 2009 at 1:29 AM

    really good writing.thanks for your information.:)-


    www.bathmateus.com

    ReplyDelete
  5. AnonymousMarch 7, 2010 at 9:47 PM

    may prime na dito sa manila

    ReplyDelete
  6. AdminMarch 8, 2010 at 9:21 AM

    thanks for the info...can you give their address so I can update the maps?
    -thanks

    ReplyDelete
  7. UnknownApril 5, 2010 at 5:10 PM

    anung floor po ang alcorcon review center..need help..kz mgrereview aq

    ReplyDelete
  8. AnonymousApril 23, 2010 at 1:16 PM

    saang branch b ng alcorcon review center? sa manila b? s recto corner loyola street, sampaloc maila

    ReplyDelete
  9. AnonymousJune 23, 2010 at 10:23 AM

    pde malaman ung bagong contact number ng alcorcon???

    ReplyDelete
  10. AnonymousSeptember 9, 2010 at 4:23 PM

    San po ba magandang mag review sa CDTC ba or alcorcon po may mga telephone number ba kayo ng Alcorcon or ng CDTC pa pa posts nmn po here

    ReplyDelete
  11. AdminSeptember 9, 2010 at 5:42 PM

    Please see this article regarding review center choice...

    http://www.tupmechanical.com/2009/06/board-exam-tip-which-review-center.html

    ReplyDelete
  12. AnonymousOctober 27, 2010 at 8:09 AM

    saan po maganda tlaga mag review na mtaas chance na pumasa?

    ReplyDelete
  13. AnonymousOctober 27, 2010 at 8:13 AM

    can u post the nw tel.no of alcorcon?

    ReplyDelete
  14. degreecelsiusOctober 27, 2010 at 1:14 PM

    meron bang nakakaalam kung kelan start ng review sa alcorcon ngayon batch? sa CDTC kasi sa nov.15 pa start? pede rin malaman kung anu bago tel no ng alcorcon? tintawagan ko yung 7425600, out of service na... cguro nagpalit na rin ng no. sila kasi nagpalit na rin sila ng puwesto, dati katapat lang ng CDCTC yung alcorcon ngayon nsa recto na sila malapit sa yellow cab.

    ReplyDelete
  15. AnonymousDecember 1, 2010 at 7:10 PM

    Pwede bang malaman kung kelan ang start ng refresher ng mga review center sa manila such as alcorcon, cdct, merit, prime para sa ME april 2011 exam?

    ReplyDelete
  16. AnonymousFebruary 18, 2011 at 1:16 PM

    PRIME? IN MANILA? WHERE PLEASE?

    ReplyDelete
  17. AnonymousApril 16, 2011 at 5:57 PM

    i been to diffrent review cnters and for me LINX is the best bcoz all teachers are academic teachers and they teach very good and specially those who have hardtimes in calculations they will guide you, prime is for elemnts only and more on memorization of problems.

    ReplyDelete
    Replies
    1. AnonymousJuly 16, 2012 at 4:32 PM

      SIR,CAN I GET THE E-MAIL ADDRESS OFF YOUR MERIT REVIEW CENTER SO THAT I CAN PREPARE ALL THE REQUIREMENTS BEFORE ENROLLING TO YOUR REVIEW CENTER.TNX

      Delete
  18. AnonymousJuly 16, 2012 at 4:40 PM

    maari po bang pkbgay ang e mail add ng merit review center?may mga katanungan po ako regarding s enrollment.if magkano babayaran 4 refreshing at sa kumpletong pag rereview...maraming salamat po!

    ReplyDelete
  19. AnonymousDecember 6, 2012 at 12:19 AM

    CDTC the best review center. Solid ang turo refresh lahat. Pulido yung banat sa turo at aayusin ang lahat ng doubts at di naturo nung college. -Proud to pass the board without leakage..

    ReplyDelete
  20. AnonymousMarch 6, 2013 at 7:25 PM

    may review center po b para s CPM? tnx

    ReplyDelete
  21. AnonymousApril 4, 2014 at 1:03 PM

    pwede po ba paki post naman new tel.no of alcorcon, Linx & MERIT Review Center

    ReplyDelete
    Replies
    1. UnknownMay 14, 2014 at 6:09 PM

      +639277757885 mam lolit of linx review center. You can ask questions to her regarding me review.

      Delete
  22. AnonymousApril 7, 2014 at 4:30 PM

    kelan b mgccmula review ng mga review center? pki.post tanx..

    ReplyDelete
    Replies
    1. UnknownMay 14, 2014 at 6:10 PM

      May 19 po ang start ng review sa linx. June 2 nman po sa prime manila.

      Delete
  23. UnknownMay 14, 2014 at 6:13 PM

    This site is very useful for ME students. God bless.

    ReplyDelete
  24. top engineering schools in the philippinesAugust 12, 2014 at 2:06 PM

    Thank you very much for this guide!

    ReplyDelete
  25. AnonymousOctober 22, 2014 at 12:15 PM

    magkaparehas lang ba ang bayad sa alcorcon at prime? magkano po

    ReplyDelete
  26. AnonymousJanuary 2, 2015 at 3:32 PM

    What is CDTC? Is it Career Development Training Center?

    ReplyDelete
  27. Cesar carpioJune 27, 2017 at 9:30 AM

    I'm one of the earlier review student back in 1987. Passed the board exam. Now I say I'm a successful engineer here in San Diego Ca working as a Subject matter expert of system design we do. The instructor we have back then are a very smart. I hope those quality remains the same.

    ReplyDelete

Post a Comment

Popular posts from this blog

PAST MECHANICAL BOARD EXAM QUESTION: Machine Design Set-1 (solutions and answers)

By Admin
The following are the solutions and answers to MODIFIED PAST MECHANICAL BOARD EXAM QUESTION: Machine Design Set-1 posted on this blog last Saturday, November 14, 2009. Again, I want to stress out that most of the questions here are modified from its original form for the purpose of improving the question. Past Mechanical Engineering Board Exam Question Number 1 A 4 inches diameter short shaft carrying 2 pulleys close to the bearings transmits how much horsepower if the shaft makes 120 rpm. A.200HP               B. 199 HP C.198 HP               D. 202 HP P = (D3N )/38 -- for mula for short shafts from PSME code P = (4)3(120)/38 P= 202 HP Past Mechanical Engineering Board Exam Question Number 2 An instrument that measures the hardness of the work piece in terms of elasticity. a. Durometer b. Scleroscope c. Mohs's Scale d. Brinell Tester Source: Machinery’s Handbook
22 comments
Read More...

SOLUTION TO MECHANICAL BOARD EXAM PROBLEMS: Power Set-1

By Admin
Here are the solutions to board problems given at Power Subject Set-1. If you do not understand anything, feel free to write a comment voicing out your concern. I'm still looking for better ways to present my solution. I still don't know how to present equations and mathematical symbols with blogger. Please bear with me. 1. An automobile tire is inflated to 32psig pressure at 50 degree F. After being driven, the temperature rises to 75 degree F. Determine the final gage pressure assuming the volume remains constant. (Electrical Engineering Board Exam Problem) Solution: Since volume is constant, use Charles’ Law on constant volume processes. P1/T1=P2/T2 Note: P and T should be absolute. (32+14.7)/ (50+460) =P2/ (75+460) P2=48.99 psia Converting back to gage pressure, P2g=48.99-14.7 P2g=34.29 psig 2. Four hundred cubic centimeters of gas at a pressure of 740 mmHg absolute and temperature of 18 degree C undergoes a process until the pressure and temperature be
8 comments
Read More...

BOARD EXAM TIP: Which Review Center?

By Admin
First of all, I would like to apologize for a long time I haven't posted anything but introduction. The reason for that is I'm busy optimizing the design of this site. I'm hoping that the make over is good. Anyway, I would like to dedicate this article to those who are going to take/retake the board exam this coming October. My sincere wish that you bring out the best among yourselves and may the deserving ones pass the exam. Going back to the One-Million-Peso worth question: "Which review center should I enroll?" , I would like to answer that in the most unbiased way I can. Of course, I'm only human and I had also my preferences but I will try my best to hide it. To start with I will enumerate some of the prominent review centers that offer board exam reviews for mechanical engineering in the Philippines. 1. Alcorcon (Cebu & Manila) 2. Excel (Cebu & Manila) 3. Linx Engineering (Manila) 4. MERIT (Manila) 5. PRIME (Cebu) 6. RLB's
105 comments
Read More...