Skip to main content

Professional Mechanical Engineer (PME) October 2010 Results

By Admin
The Professional Regulation Commission (PRC) announces that 22 passed the Professional Mechanical Engineer Examination given by the Board of Mechanical Engineering in Manila this October 2010.

The following are the successful examinees.

1 AGOSTO, FLORENDO SABADO
2 AGTARAP, FERDINAND OLIVAR
3 ALCORIZA, RODOLFO SANTOS
4 AMTO, JOEL CELMAR
5 BALDONADO, BERNARDINO MAGUMUN
6 BOTE, RICARDO JR BAUTISTA
7 CABRERA, WILLIAM MATURAN
8 CANSINO, CECILIO JR LOPEZ
9 CHAVIT, CECILIO BOMEDIANO
10 DE LA ROSA, FERDINAND MANGAT
11 DIASANA, SERGIO SR BABA
12 DOROTAN, ELMER VILLANCA
13 GULMATICO, LLOYD CASTROBERDE
14 LORETO, JORGE JR DELOS REYES
15 MALOLES, ROBERT DICK TELYAEN
16 PEREZ, RIOLANDO VILLANUEVA
17 SIAPNO, JOSE II PADON
18 SO, ROLANDO CHING
19 TAPU, BENITO TABUT
20 TIGARONITA, BEN JR CORDERO
21 VILLAREAL, REYNAN MORATA
22 YU, LAWRENCE RUSSIANA
NOTHING FOLLOWS----------------------
Labels:

Comments

  1. AnonymousOctober 17, 2011 at 4:42 PM

    http://justdownload.us/

    ReplyDelete
  2. UnknownAugust 11, 2015 at 2:50 AM

    My greetings to newcomers!

    ReplyDelete
  3. best writing serviceApril 4, 2017 at 9:16 PM

    I like the idea but I think that it requires more content to make the information clear. I'll wait for more updates in the future. Thank you!

    ReplyDelete
  4. essaywriter-s.comApril 20, 2017 at 4:10 PM

    Thanks for the shared post! It seems to be a bit compressed, I guess... Will you be able to extend the entry?

    ReplyDelete
  5. essay writer sApril 28, 2017 at 9:35 PM

    What were you supposed to share with? the following post requires certain improvements or extension.

    ReplyDelete
  6. Sophie GraceJune 19, 2019 at 3:15 PM

    I will bookmark your blog and take the feeds also I'm happy to find so many useful info here in the post, we need work out more strategies in this regard, thanks for sharing. net worth list

    ReplyDelete

Post a Comment

Popular posts from this blog

PAST MECHANICAL BOARD EXAM QUESTION: Machine Design Set-1 (solutions and answers)

By Admin
The following are the solutions and answers to MODIFIED PAST MECHANICAL BOARD EXAM QUESTION: Machine Design Set-1 posted on this blog last Saturday, November 14, 2009. Again, I want to stress out that most of the questions here are modified from its original form for the purpose of improving the question. Past Mechanical Engineering Board Exam Question Number 1 A 4 inches diameter short shaft carrying 2 pulleys close to the bearings transmits how much horsepower if the shaft makes 120 rpm. A.200HP               B. 199 HP C.198 HP               D. 202 HP P = (D3N )/38 -- for mula for short shafts from PSME code P = (4)3(120)/38 P= 202 HP Past Mechanical Engineering Board Exam Question Number 2 An instrument that measures the hardness of the work piece in terms of elasticity. a. Durometer b. Scleroscope c. Mohs's Scale d. Brinell Tester Source: Machinery’s Handbook
18 comments
Read More...

SOLUTION TO MECHANICAL BOARD EXAM PROBLEMS: Power Set-1

By Admin
Here are the solutions to board problems given at Power Subject Set-1. If you do not understand anything, feel free to write a comment voicing out your concern. I'm still looking for better ways to present my solution. I still don't know how to present equations and mathematical symbols with blogger. Please bear with me. 1. An automobile tire is inflated to 32psig pressure at 50 degree F. After being driven, the temperature rises to 75 degree F. Determine the final gage pressure assuming the volume remains constant. (Electrical Engineering Board Exam Problem) Solution: Since volume is constant, use Charles’ Law on constant volume processes. P1/T1=P2/T2 Note: P and T should be absolute. (32+14.7)/ (50+460) =P2/ (75+460) P2=48.99 psia Converting back to gage pressure, P2g=48.99-14.7 P2g=34.29 psig 2. Four hundred cubic centimeters of gas at a pressure of 740 mmHg absolute and temperature of 18 degree C undergoes a process until the pressure and temperature be
8 comments
Read More...

BOARD EXAM TIP: Which Review Center?

By Admin
First of all, I would like to apologize for a long time I haven't posted anything but introduction. The reason for that is I'm busy optimizing the design of this site. I'm hoping that the make over is good. Anyway, I would like to dedicate this article to those who are going to take/retake the board exam this coming October. My sincere wish that you bring out the best among yourselves and may the deserving ones pass the exam. Going back to the One-Million-Peso worth question: "Which review center should I enroll?" , I would like to answer that in the most unbiased way I can. Of course, I'm only human and I had also my preferences but I will try my best to hide it. To start with I will enumerate some of the prominent review centers that offer board exam reviews for mechanical engineering in the Philippines. 1. Alcorcon (Cebu & Manila) 2. Excel (Cebu & Manila) 3. Linx Engineering (Manila) 4. MERIT (Manila) 5. PRIME (Cebu) 6. RLB's
105 comments
Read More...