Skip to main content

Results of Mechanical Engineer Board Exam on Middle East - December 2011

The Professional Regulation Commission (PRC) announces that 31 out of 98 passed the Mechanical Engineer Board Examination given by the Board of Mechanical Engineering in the cities of Abu Dhabi, United Arab Emirates; Jeddah and Riyadh, Kingdom of Saudi Arabia and in Doha, Qatar this December 2011.  

The following are the list of passers:

MECHANICAL ENGINEER BOARD EXAMINATION - MIDDLE EAST

Held on DECEMBER 9 and 10, 2011
Released on DECEMBER 22, 2011

Seq. No. N a m e

1 AUSTRIA, ROWEL ATIENZA
2 CATAYLO, ROBCHAR DAYOCOS
3 DE LA PAZ, RAMIL PABON
4 DIÑO, LOUIE JIONGCO
5 DURANTE, ROGELIO ALBARIDA
6 FLORIDO, MARCELO III CADUNGOG
7 FORTUS, ABBE PHAROAH ARIAS
8 HERNANDO, SCHUBERT LANGBID
9 JUNSAY, ROSELLER JR ABION
10 LEYVA, ROMMEL ROGUEL
11 MACASA, JACKSON BAGON
12 MAGNETICO, JOEL QUERO
13 MALANG, DEXTER ALLAN CARAIG
14 MORDIDO, WILLIAM MANA
15 OPLADO, ROMEO TUDTUD
16 ORA, ANTHONY BALACUIT
17 PABLO, IAN LINUS LIBRE
18 PALCE, NICASIO JR PEÑALOSA
19 PALTINGCA, NICO CANOY
20 PANGANGAAN, JOSEPH VILLAR
21 PUGOY, JOECHRIS RONQUILLO
22 QUINTANA, MANUEL MELCHOR REMOLAR
23 QUISTO, ARIEL ANDAYA
24 RUBIO, JAY MACION
25 SEGUERRA, JESSE REPUNTE
26 SILADES, GENEROSO JR LITO
27 TALA, JOHN ROQUE
28 TAMPON, GONZALO JR VILLAFUERTE
29 TAN, JEFFREY LINGA
30 VILLANUEVA, JOEN BAUTISTA
31 YMATA, JOHN JOHN LOUIE LEGISNIANA
NOTHING FOLLOWS----------------------

Comments

  1. I had bought Nissan six months ago and I am facing some problems. Can I take my 2008 Nissan Altima with a certified pre-owned limited warranty to my local auto mechanic for repairs?

    ReplyDelete
  2. yes of course! you can bring that to any nissan dealer shop so that they can diagnose using the CONSULT. but i think you need to pay for that since your vehicle is out of warranty.

    ReplyDelete
  3. Congratulations to new passers of ME Board exam. To God be the Glory
    http://www.ilearnalot.com

    ReplyDelete
  4. Nice . If there are some good mechanical engineers looking for work please apply on http://www.talentailor.com/index.php?route=service/jobdetails&jobId=MTY4

    ReplyDelete
  5. I thought of some explanations here. It would be really useful if you'll share some details. I think that those might become a lot clearer.

    ReplyDelete
  6. Engrossing substance I haven't been finished specified info in a lasting time. staqoo.com

    ReplyDelete
  7. Nice post. I was checking constantly this blog and I am impressed! Extremely helpful information specially the last part I care for such info a lot. I was seeking this particular information for a very long time. Thank you and good luck. http://staqoo.ie

    ReplyDelete
  8. Wow, What a Excellent post. I really found this to much informatics. It is what i was searching for.I would like to suggest you that please keep sharing such type of info.Thanks psc result marksheet

    ReplyDelete
  9. Thank you because you have been willing to share information with us. we will always appreciate all you have done here because I know you are very concerned with our.
    BA 1st Year Result 2019

    ReplyDelete

Post a Comment

Popular posts from this blog

BOARD EXAM TIP: Which Review Center?

First of all, I would like to apologize for a long time I haven't posted anything but introduction. The reason for that is I'm busy optimizing the design of this site. I'm hoping that the make over is good. Anyway, I would like to dedicate this article to those who are going to take/retake the board exam this coming October. My sincere wish that you bring out the best among yourselves and may the deserving ones pass the exam.




Going back to the One-Million-Peso worth question: "Which review center should I enroll?", I would like to answer that in the most unbiased way I can. Of course, I'm only human and I had also my preferences but I will try my best to hide it.

To start with I will enumerate some of the prominent review centers that offer board exam reviews for mechanical engineering in the Philippines.

1. Alcorcon (Cebu & Manila)
2. Excel (Cebu & Manila)
3. Linx Engineering (Manila)
4. MERIT (Manila)
5. PRIME (Cebu)
6. RLB's CDTC (Manila)
I'…

PAST MECHANICAL BOARD EXAM QUESTION: Machine Design Set-1 (solutions and answers)

The following are the solutions and answers to MODIFIED PAST MECHANICAL BOARD EXAM QUESTION: Machine Design Set-1 posted on this blog last Saturday, November 14, 2009.




Again, I want to stress out that most of the questions here are modified from its original form for the purpose of improving the question.

Past Mechanical Engineering Board Exam Question Number 1
A 4 inches diameter short shaft carrying 2 pulleys close to the bearings transmits how much horsepower if the shaft makes 120 rpm.

A.200HP               B. 199 HP

C.198 HP              D. 202 HP

P = (D3N )/38 -- for mula for short shafts from PSME code

P = (4)3(120)/38

P= 202 HP

Past Mechanical Engineering Board Exam Question Number 2
An instrument that measures the hardness of the work piece in terms of elasticity.

a. Durometer

b. Scleroscope

c. Mohs's Scale

d. Brinell Tester

Source: Machinery’s Handbook

SOLUTION TO MECHANICAL BOARD EXAM PROBLEMS: Power Set-1

Here are the solutions to board problems given at Power Subject Set-1. If you do not understand anything, feel free to write a comment voicing out your concern. I'm still looking for better ways to present my solution. I still don't know how to present equations and mathematical symbols with blogger. Please bear with me.

1. An automobile tire is inflated to 32psig pressure at 50 degree F. After being driven, the temperature rises to 75 degree F. Determine the final gage pressure assuming the volume remains constant. (Electrical Engineering Board Exam Problem)

Solution:
Since volume is constant, use Charles’ Law on constant volume processes.
P1/T1=P2/T2
Note: P and T should be absolute.

(32+14.7)/ (50+460) =P2/ (75+460)

P2=48.99 psia

Converting back to gage pressure,

P2g=48.99-14.7

P2g=34.29 psig


2. Four hundred cubic centimeters of gas at a pressure of 740 mmHg absolute and temperature of 18 degree C undergoes a process until the pressure and temperature becomes 760 mmHg abso…